Your browser either does not support JavaScript or you have turned JavaScript off.

4G LTE-A Outdoor Router

LTE7485-S905, 4G LTE-A Outdoor Router

Zyxel LTE7485-S905 4G LTE-A Outdoor Router with the support of Cat. 16 and 3.5 GHz CBRS band is a CPE-CBSD Category B with maximum 36 dBm per 10 GHz channel EIRP and SAS client built-in. Deliver lightning-fast internet connectivity through Fixed Wireless Access (FWA) with a better signal performance over extended distances.

SAS approved: Certified by Commscope, Federated Wireless, and Google.

Learn more about Zyxel CBRS Solutions
LTE7485-S905, LTE CBRS
LTE7485-S905, Cat. 16/DL 580 Mbps
LTE7485-S905, High-power CPE-CBSD with SAS-client
LTE7485-S905, 4x4 MIMO antennas 13 dBi/element
LTE7485-S905,  802.3af/at PoE
LTE7485-S905, TR-069/TR-181/TR-143
LTE7485-S905, IP68
LTE7485-S905, Mobile apps


Lightning-fast internet connectivity

Zyxel LTE7485-S905 employs 3GPP UE downlink Category 16 – the high-level practice LTE-A technology with data rates of up to 580/30 Mbps* through 8 spatial streams on 2 component carriers.

Enhance your service coverage with high-gain antennas

The FCC certified LTE7485-S905 and built-in SAS (Spectrum Access System) client allows you to increase your service reach because of high-power signal transmissions and 4x4 MIMO high-gain directional antenna of up to 13 dBi per element. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage.

Non-stop connectivity with “Dual-WAN Failover” design

The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports “Dual-WAN Failover”, you can just connect Zyxel LTE7485-S905 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.

LTE7485-S905, Non-stop connectivity with Dual-WAN Failover design

Easy and flexible installation

Zyxel LTE7485-S905 can be easily and flexibly installed with a mounting kit supporting either wall or poll installation, an integrated 802.3af/at Gigabit PoE support, and a dedicated mobile app, which shows intuitive RF signal strength graphics for base station alignment.

Zyxel outdoor router installation tutorial LTE7485-S905, Easy and flexible installation

Remote management for lower OPEX

With TR-069, TR-181 and TR-143 support, the Zyxel LTE7485-S905 effectively secures OPEX by reducing the frequency of on-site support and by providing simplified diagnostic, configuration and troubleshooting processes.

Application diagram

LTE7485-S905, 4G LTE-A Outdoor Router
  • The maximum wireless data transfer rate is derived from 3GPP specifications close to DL UE Category 16 and UL UE Category 13. The actual data transfer rate will vary from network environment including distance, network traffic, building site materials/construction, interference from other wireless devices, and other adverse conditions.

* All specifications are subject to change without notice.